![]() ![]() We recommend you load OHP transparencies and sheets of label paper and translucent paper one by one. When you use OHP transparencies, fan them for each use. For details, see Copy and Document Server Reference and Printer Reference. Use A4 or 8 1/ 2 × 11 size transparencies, and specify their size. When you load OHP transparencies, check the front and back of the sheets, and place them correctly, or a misfeed might occur. For details, see "Copying from the Bypass Tray" in Copy and Document Server Reference and "Setting Paper on the Bypass Tray" in Printer Reference. To print on OHP transparencies, load OHP transparencies on the bypass tray, press the key, and then set to. ĭo not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a misfeed. When you use the bypass tray, it is recommended to set the paper direction to. When loading paper in the bypass tray, place the print side face down. When loading paper in the paper trays 1 - 2, and the lower paper trays, place the print side face up. For details about Paper Type: Bypass Tray, see "System Settings", Network and System Settings Guide. When using translucent paper or label paper, make sure to select the appropriate paper type. ![]() (Glossy paper and OHP transparencies can produce noise when delivered.) This noise does not indicate a problem and print quality is unaffected. *9 It is recommended to place one sheet at a time.Ĭertain types of paper produce noise when delivered. *8 If you wish to copy onto OHP transparencies, select. See "Loading Paper", for more information. *7 When loading paper, make sure the stack height does not exceed the limit mark of the paper tray. See "Copying from the Bypass Tray", Copy and Document Server Reference. *6 If you want to copy onto thick (105 g/m 2, 28 lb. *5 Press the key, and then enter the paper size using the number keys. *4 Press the key, and then select the paper size. For details about Tray Paper Size: Tray 2-4, see "System Settings", Network and System Settings Guide. *3 Enter the paper size using the number keys in System Settings. ![]() *2 Select the paper size in System Settings. *1 The paper size is detected automatically. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |